Data transmission
Switching capacity:The data transfer capacity of the switch per second.
16 Gbit/s
Supported data transfer rates:Rates at which data can be transferred. May vary according to network configurations.
10/100/1000 Mbps
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
4000 entries
Design
Certification:
RoHS, FCC, ICES-003, CE, C-Tick, VCCI, cUL, LVD
Stackable:Devices can be placed on top of each other.
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
Management features
Quality of Service (QoS) support:
Switch layer:A network switch is a computer networking device that links networking segments. A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things).
L2
Switch type:What switch device has, managed or unmanaged.
Unmanaged
Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C
Other features
Input frequency:The frequency (Hz) which is required to power the product.
50/60 Hz
Networking features:
Gigabit Ethernet
Dimensions (WxDxH):Dimensions of the product (Width x Depth x Height).
190 x 120 x 38 mm
Ports & interfaces
Power connector:
DC-in jack
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
8
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
63.2 W
Output power:The power that the device can produce.
60 W
Input voltage:The voltage (V) which is required to power the product.
100 - 240 V
Power over Ethernet (PoE)
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
