Certificates
Safety:List of regulatory safety standards for all countries in which this product has been certified.
EN 60825-1
Compliance certificates:
RoHS
Certification
Safety:List of regulatory safety standards for all countries in which this product has been certified.
EN 60825-1
Compliance certificates:
RoHS
Features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
General
Type:Characteristics of the device.
Network Transceiver Modules
Logistics data
Harmonized System (HS) code:
85369010
Operational conditions
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)
Packaging data
Package weight:Weight of the packaged product.
35 g
Package height:The distance from the top to the bottom of the packaging.
65 mm
Package depth:The distance from the front to the back of the packaging.
20 mm
Package width:The distance from one side of the packaging to the other.
106 mm
Performance
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3z
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
2000 m
Fiber cable diameters supported (core/cladding):
62.5/125 µm
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Maximum data transfer rate:
1250 Mbit/s
SFP transceiver type:
Fiber optic
Power
Maximum current:The greatest possible amount of current, which is a quantity representing the rate of flow of electric charge.
0.3 A
Input voltage:The voltage (V) which is required to power the product.
3.3 V
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
20 g
Height:The measurement of the product from head to foot or from base to top.
13.7 mm
Depth:The distance from the front to the back of something.
12 mm
Width:The measurement or extent of something from side to side.
57 mm
