Design
Features
Built-in sensors details:
Paper End, Paper Near End, Wall Mounting Paper
Near End, Rear Cover Open, Black Mark
Autocutter durability:
1.5 million cuts
Internal memory:The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.
64 MB
General
Type:Characteristics of the device.
POS Printers
Logistics data
Harmonized System (HS) code:
84433210
Network
Wi-Fi:Popular technology that allows an electronic device to exchange data or connect to the internet wirelessly using radio waves.
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Networking
Wi-Fi:Popular technology that allows an electronic device to exchange data or connect to the internet wirelessly using radio waves.
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Operational conditions
Operating relative humidity (H-H):
10 - 80%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Storage relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C
Other features
Buffer size:The buffer is a temporary memory area in which data is stored while it is being processed or transferred, especially one used while streaming video or downloading audio. The buffer size is usually measured in MB (megabytes) or KB (kilobytes).
64 KB
Paper handling
Maximum printing width:The maximum width of the image that can be printed.
6.35 cm
Maximum roll diameter:The maximum size of roll that can be used, measured by the diameter which is the distance from one side to the other with a straight line passing through the centre of the roll.
8.3 cm
Media thickness:
0.06 - 0.085 mm
Supported paper width:
76.5 mm
Ports & interfaces
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Serial ports quantity:The number of serial ports in a computer or peripheral. A serial port is a serial communication physical interface through which information transfers in or out one bit at a time. The term "serial port" usually identifies hardware more or less compliant to the RS-232 standard, intended to interface with a modem or with a similar communication device. In modern computers and peripherals, serial ports have largely been replaced by USBs and other interfaces.
1
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
1
USB port:Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. USB was designed to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has become commonplace on other devices, such as smartphones, PDAs and video game consoles. USB has effectively replaced a variety of earlier interfaces, such as serial and parallel ports, as well as separate power chargers for portable devices.
Connectivity technology:
Wired
Power
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100-240 V
Power source type:What the power source is.
AC
Printing
Print speed:The maximum speed at which a printer can print.
5.1 ips
Maximum resolution:Maximum printing resolution.
80 x 144 DPI
Type:Characteristics of the device.
POS printer
Print technology:Indicates the method used to print by this product.
Dot matrix
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
2.4 kg
Height:The measurement of the product from head to foot or from base to top.
157 mm
Depth:The distance from the front to the back of something.
239 mm
Width:The measurement or extent of something from side to side.
160 mm
