Kingston Technology ValueRAM 8GB DDR4 2666MHz memory module 1 x 8 GB

Quick Code: Q230193 MPN: KVR26N19S8/8
£26.99

Add to basket
In Stock

Key Features

  • Power Supply: VDD=1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP - 2.5V Typical
  • VDDSPD=2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for
  • data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.23” (31.25mm)
  • RoHS Compliant and Halogen-Free

Overview


This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of
19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:





At-a-glance


  • 16 internal banks; 4 groups of 4 banks each

  • Data bus inversion (DBI) for data bus

  • data, strobe, and mask signals

  • Fixed burst chop (BC) of 4 and burst length (BL) of 8

  • Fly-by topology

  • Low-power auto self refresh (LPASR)

  • Nominal and dynamic on-die termination (ODT) for

  • On-board I2 serial presence-detect (SPD) EEPROM

  • On-die VREFDQ generation and calibration

  • PCB: Height 1.23” (31.25mm)

  • Power Supply: VDD=1.2V Typical

  • RoHS Compliant and Halogen-Free

  • Selectable BC4 or BL8 on-the-fly (OTF)

  • Single-rank

  • Terminated control command and address bus

  • VDDQ = 1.2V Typical

  • VDDSPD=2.2V to 3.6V

  • via the mode register set (MRS)

  • VPP - 2.5V Typical




Reasons to buy

  • 16 internal banks; 4 groups of 4 banks each
  • Data bus inversion (DBI) for data bus
  • data, strobe, and mask signals
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8
  • Fly-by topology
  • Low-power auto self refresh (LPASR)
  • Nominal and dynamic on-die termination (ODT) for
  • On-board I2 serial presence-detect (SPD) EEPROM
  • On-die VREFDQ generation and calibration
  • PCB: Height 1.23” (31.25mm)
  • Power Supply: VDD=1.2V Typical
  • RoHS Compliant and Halogen-Free
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Single-rank
  • Terminated control command and address bus
  • VDDQ = 1.2V Typical
  • VDDSPD=2.2V to 3.6V
  • via the mode register set (MRS)
  • VPP - 2.5V Typical

Specification

Technical Description: Kingston Technology ValueRAM 8GB DDR4 2666MHz memory module 1 x 8 GB
Features
Linux operating systems supported:8 RT. Linux (9.4, 9.5), Red Hat Enterprise Linux 5.0 (supported with a pre-built package); SUSE Linux (10.3, 11.0, 11, 11.1, 11.2), Fedora (9, 9.0, 10, 10.0, 11.0, 11, 12, 12.0), Ubuntu (8.04, 8.04.1, 8.04.2, 8.10, 9.04, 9.10, 10.04), Debian (5.0, 5.0.1, 5.0.2, 5.0.3)
Yes
Mac operating systems supported:Mac operating systems e.g. OS X can be used with the device.
Yes
Windows operating systems supported:Windows vesions wich can be used with the device.
Yes
Lead plating:
Gold
Cooling type:The method used to cool the device or to cool the air around the device.
Heatsink
Country of origin:Country where the device is made.
Taiwan
Product colour:
Green
SPD profile:
Yes
Row active time:
32 ns
Refresh row cycle time:
350 ns
Row cycle time:
45.75 ns
Module configuration:
1024M x 64
Memory voltage:The voltage (V) of the memory in the device.
1.2 V
Memory ranking:
1
CAS latency:Column Address Strobe (CAS) latency, or CL, is the delay time between the moment a memory controller tells the memory module to access a particular memory column on a RAM module, and the moment the data from the given array location is available on the module's output pins. In general, the lower the CAS latency, the better.
19
ECC:ECC means Error Correction Code, and it is memory that is able to detect and correct some memory errors without user intervention.
No
Memory form factor:Design of the memory e.g. 240-pin DIMM, SO-DIMM.
288-pin DIMM
Component for:What this product is used as a part of (component for).
PC/Server
Memory clock speed:The frequency at which the memory (e.g. RAM) runs.
2666 MHz
Internal memory type:The type of internal memory such as RAM, GDDR5.
DDR4
Memory layout (modules x size):
1 x 8 GB
Internal memory:A computer's memory which is directly accessible to the CPU.
8 GB
Buffered memory type:
Unregistered (unbuffered)

General
Type:Characteristics of the device.
Memory RAM

Logistics data
Harmonized System (HS) code:
84733020

Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-55 - 100 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 85 °C

Sustainability
Doesn't contain:
Halogen

Technical details
Compliance certificates:
RoHS

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
31.2 mm
Width:The measurement or extent of something from side to side.
133.3 mm

Product details

KVR26N19S8/8 Kingston

Kingston Technology ValueRAM 8GB DDR4 2666MHz memory module 1 x 8 GB

£26.99 and In stock

SKU: KVR26N19S8/8