Quick Code: Q MPN: ACFAN00146A
£0.00

Out of Stock

Overview


ARCTIC’s versatile assortment of PC fans are both quiet and powerful. We have the right options for any application or need, in sizes from 80 to 140 mm. Plus, our case fans are equipped with state-of-the-art engine technology, innovative fan blades and high quality bearings, making them particularly durable and efficient.




At-a-glance


  • Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency.
    In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.

  • The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting.

  • The ARCTIC BioniX P120 A-RGB have a modular cable management and use two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection.
    * all necessary cables are included

  • The BioniX P120 A-RGB is availlable as Singe Case Fan or in a Bundle, including 3 BioniX P120 A-RGB and ARCTICs A-RGB Controller.

  • The operating noise of the newly developed ARCTIC motor is barely noticeable even at the lowest speed.
    Thanks to sinus magnetization, the P fan's motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.

  • With a wide speed range and the connector functionality, the fan speed of the BioniX P120 A-RGB can be controlled synchronously with other fans. This reduces the noise development to a minimum while at the same time guaranteeing maximum cooling performance.

  • With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance.
    This makes the BioniX P120 A-RGB particularly suitable for use on covered case vents or inlets with filters.




Reasons to buy

  • Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency.
    In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.
  • The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting.
  • The ARCTIC BioniX P120 A-RGB have a modular cable management and use two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection.
    * all necessary cables are included
  • The BioniX P120 A-RGB is availlable as Singe Case Fan or in a Bundle, including 3 BioniX P120 A-RGB and ARCTICs A-RGB Controller.
  • The operating noise of the newly developed ARCTIC motor is barely noticeable even at the lowest speed.
    Thanks to sinus magnetization, the P fan's motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.
  • With a wide speed range and the connector functionality, the fan speed of the BioniX P120 A-RGB can be controlled synchronously with other fans. This reduces the noise development to a minimum while at the same time guaranteeing maximum cooling performance.
  • With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance.
    This makes the BioniX P120 A-RGB particularly suitable for use on covered case vents or inlets with filters.

Specification

Technical Description:

Design
Illumination colour:The colour of the illumination, which is the light which allows you the see the display etc. clearly.
Blue, Green, Red
Number of LEDs:
12
Illumination LED:
Yes
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
1 fan(s)
Product colour:
Black

Logistics data
Harmonized System (HS) code:
84733080

Other features
Country of origin:Country where the device is made.
China

Packaging content
Number of screws:
8
Screws included:
Yes

Performance
Bearing type:
Fluid Dynamic Bearing (FDB)
Pulse-width modulation (PWM) support:
Yes
Maximum air pressure:
2.1 mmH2O
Airflow:Description of the airflow characteristics for the product
81.55 m³/h
Maximum airflow:The greatest airflow that can be produced by the device.
48 cfm
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
0.45 sone
Rotational speed (max):
2300 RPM
Rotational speed (min):
400 RPM
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
12 cm
Type:Characteristics of the device.
Fan
Suitable location:
Computer case

Power
Rated current:
0.13 A
Starting voltage:
7 V
Voltage:
12 V

Technical details
Compliance certificates:
RoHS

Weight & dimensions
Package weight:Weight of the packaged product.
259 g
Package height:The distance from the top to the bottom of the packaging.
34 mm
Package depth:The distance from the front to the back of the packaging.
161 mm
Package width:The distance from one side of the packaging to the other.
125 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
213 g
Height:The measurement of the product from head to foot or from base to top.
30 mm
Depth:The distance from the front to the back of something.
120 mm
Width:The measurement or extent of something from side to side.
120 mm

Product details

ACFAN00146A Arctic

£0.00 and

SKU: ACFAN00146A