Quick Code: Q MPN: ACFRE00078A
£0.00

Out of Stock

Overview


Here is the Freezer i13 X - Ready to cool your Intel CPU

The ARCTIC Freezer i13 X is a compact CPU cooler with one 92mm fan. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was been able to significantly improve the Freezer i13 X's cooling performance. It is supplied with pre-applied ARCTIC MX-2 thermal compound and has a simple assembly system.




At-a-glance


  • ARCTIC offers a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker in an easy-to-reach place and never again waste time searching for product instructions.

  • In addition to operating more quietly, even at maximum speed, the Freezer i13 X's built-in fan motor is also much more efficient.

  • Inspired by the P-series, the Freezer i13 X's fan benefits from all of the advantages of P-fans:

    High static pressure for increased cooling performance
    Broad RPM range
    Lower power consumption
    Less vibration
    PWM for synchronous fan control

  • Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

  • Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.

  • The ARCTIC Freezer i13 X sets new standards in cooling. Compared to its predecessor, a performance increase of almost 4 % could be tested.

  • The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

  • The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.

  • The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X.

  • The Freezer i13 X uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes.




Reasons to buy

  • ARCTIC offers a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker in an easy-to-reach place and never again waste time searching for product instructions.
  • In addition to operating more quietly, even at maximum speed, the Freezer i13 X's built-in fan motor is also much more efficient.
  • Inspired by the P-series, the Freezer i13 X's fan benefits from all of the advantages of P-fans:

    High static pressure for increased cooling performance
    Broad RPM range
    Lower power consumption
    Less vibration
    PWM for synchronous fan control
  • Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.
  • Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.
  • The ARCTIC Freezer i13 X sets new standards in cooling. Compared to its predecessor, a performance increase of almost 4 % could be tested.
  • The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.
  • The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.
  • The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X.
  • The Freezer i13 X uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes.

Specification

Technical Description:

Design
Number of heat pipes:
3
Fins material:
Aluminium
Number of fins:
44
Number of fan blades:
5
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
1 fan(s)
Product colour:
Aluminium, Black, White

Logistics data
Harmonized System (HS) code:
84733080

Other features
Country of origin:Country where the device is made.
China

Packaging content
Mounting kit:
Yes
Package type:The type of product package e.g. box.
Box

Performance
Quantity per pack:The amount in each pack.
1 pc(s)
Bearing type:
Fluid Dynamic Bearing (FDB)
Pulse-width modulation (PWM) support:
Yes
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
0.3 sone
Rotational speed (max):
2000 RPM
Rotational speed (min):
300 RPM
Supported processor sockets:The sockets (plugs) for processors that are supported (can be used) by the device.
LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H)
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
9.2 cm
Type:Characteristics of the device.
Air cooler
Suitable location:
Processor

Power
Rated current:
0.07 A
Thermal Design Power (TDP):
150 W
Voltage:
12 V

Weight & dimensions
Package weight:Weight of the packaged product.
610 g
Package height:The distance from the top to the bottom of the packaging.
145 mm
Package depth:The distance from the front to the back of the packaging.
94 mm
Package width:The distance from one side of the packaging to the other.
108 mm
Fins thickness:
0.4 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
443 g
Height:The measurement of the product from head to foot or from base to top.
137 mm
Depth:The distance from the front to the back of something.
86 mm
Width:The measurement or extent of something from side to side.
109 mm

Product details

ACFRE00078A Arctic

£0.00 and

SKU: ACFRE00078A