ARCTIC Freezer 7 X CO - Compact Multi-Compatible CPU Cooler for Continuous Operation

Overview

At-a-glance

• Compatible with Intel® & AMD® sockets


• Extra long life span thanks to dual ball bearing and low motor temperature


• In addition to operating more quietly, even at maximum speed, the Freezer 7 X CO built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.


• Inspired by the P-series, the Freezer 7 X CO's fan benefits from all of the advantages of P-fans:
  • High static pressure for increased cooling performance
  • Broad RPM range
  • Lower power consumption
  • Less vibration
  • PWM for synchronous fan control


• Lower power consumption and less vibration with new motor technology


• Offset heat pipes ensure optimal heat dissipation


• Pre-applied MX-2 thermal paste


• Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.


• The ARCTIC Freezer 7 X CO sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.


• The direct touch heat pipes attached to the Freezer 7 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.


• The Freezer 7 X CO is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.


• The Freezer 7 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 ° C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X CO.


• The Freezer 7 X CO uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.


• The premium quality dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.


• We offer a regulary updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker in an easy-to-reach place and never again waste time searching for product instructions.

Reasons to buy