Quick Code: Q MPN: ACFRE00110A
£0.00

Out of Stock

Overview


Outstanding cooling performance through liquid cooling. ARCTIC's Premium Liquid Freezer range offers impressively high performance at moderate prices, without the complexity of conventional CPU water coolers. Completely maintenance-free, the all-in-one cooler with various models for smaller and larger cases covers all the most important current CPU sockets.




At-a-glance


  • Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100 % convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, our customer service team will send you a replacement free of charge and easily, without a need to replace the entire unit.

    The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15 °C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.

  • The fiber-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large cases and effectively prevents the cooling liquid from evaporating, so that you do not have to worry about refilling the compact water cooling system.

    It also hides the cables of your radiator fans thanks to sophisticated cable management. So you only have to connect two plugs to the mainboard, saving valuable time during installation. In the end, you won't need to hide any more cables and your view is reduced to just the essentials.

  • The illuminated P-fans are already mounted on the compact water cooling system works with the following advantages:

    • High static pressure for improved cooling performance |2 mm H2O
    • Extended speed range | 200 - 1900 rpm (1800 rpm on the radiator)
    • Low power consumption | 0.17 A (0.2 A LEDs)
    • Less vibration and rubber bumpers | reduced by > 95%
    • Improved lifetime | 6 years warranty
    • High quality plain bearing
    • PWM for synchronous pump/fan control
    • RGB sharing for synchronous lighting

  • The Liquid Freezer II RGB combines the efficient, award-winning PWM pump of the Liquid Freezer II with new RGB fans optimised for static pressure. This gives you a whole new aesthetic with extremely low noise and equally low temperatures.

  • Unlike many of our competitors, we went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.9 W at no load, 2.5 W under typical load and a maximum of 5.3 W under full load for the entire AiO.

  • Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.

    Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 °C lower temperature increase in the temporary turbo mode of modern CPUs.




Reasons to buy

  • Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100 % convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, our customer service team will send you a replacement free of charge and easily, without a need to replace the entire unit.

    The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15 °C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.
  • The fiber-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large cases and effectively prevents the cooling liquid from evaporating, so that you do not have to worry about refilling the compact water cooling system.

    It also hides the cables of your radiator fans thanks to sophisticated cable management. So you only have to connect two plugs to the mainboard, saving valuable time during installation. In the end, you won't need to hide any more cables and your view is reduced to just the essentials.
  • The illuminated P-fans are already mounted on the compact water cooling system works with the following advantages:

    • High static pressure for improved cooling performance |2 mm H2O
    • Extended speed range | 200 - 1900 rpm (1800 rpm on the radiator)
    • Low power consumption | 0.17 A (0.2 A LEDs)
    • Less vibration and rubber bumpers | reduced by > 95%
    • Improved lifetime | 6 years warranty
    • High quality plain bearing
    • PWM for synchronous pump/fan control
    • RGB sharing for synchronous lighting
  • The Liquid Freezer II RGB combines the efficient, award-winning PWM pump of the Liquid Freezer II with new RGB fans optimised for static pressure. This gives you a whole new aesthetic with extremely low noise and equally low temperatures.
  • Unlike many of our competitors, we went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.9 W at no load, 2.5 W under typical load and a maximum of 5.3 W under full load for the entire AiO.
  • Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.

    Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 °C lower temperature increase in the temporary turbo mode of modern CPUs.

Specification

Technical Description:

Design
Fan connector:
4-pin
Number of LEDs:
12
Illumination LED:
Yes
Number of fan blades:
5
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
3 fan(s)
Radiator material:
Aluminum
Product colour:
Black

Logistics data
Harmonized System (HS) code:
84733080

Other features
Country of origin:Country where the device is made.
China

Packaging content
CPU bracket(s):
Yes
LED controller interface:
4-pin
LED controller:
Yes
Thermal pad included:
Yes
Mounting kit:
Yes
Package type:The type of product package e.g. box.
Box

Performance
Fan speed (max):
1900 RPM
Fan speed (min):
200 RPM
Fan static pressure:
2 mmH2O
Pump motor speed (max):
2000 RPM
Pump motor speed (min):
800 RPM
VRM fan speed (max):
3000 RPM
VRM fan speed (min):
1000 RPM
Quantity per pack:The amount in each pack.
1 pc(s)
Pump connector:
4-pin
Bearing type:
Fluid Dynamic Bearing (FDB)
Pulse-width modulation (PWM) support:
Yes
Airflow:Description of the airflow characteristics for the product
117.06 m³/h
Maximum airflow:The greatest airflow that can be produced by the device.
68.9 cfm
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
0.3 sone
Rotational speed (max):
1800 RPM
Rotational speed (min):
200 RPM
Supported processor sockets:The sockets (plugs) for processors that are supported (can be used) by the device.
LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1700, LGA 2011-v3 (Socket R), LGA 2066, Socket AM3, Socket AM3+, Socket AM4, Socket AM5
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
14 cm
Type:Characteristics of the device.
Liquid cooling kit
Suitable location:
Processor

Power
Fan current:
0.17 A
Fan voltage:
12 V
LED voltage:
12 V
Pump power consumption:
0.5 W
VRM fan power consumption:
2.7 W

Weight & dimensions
Package weight:Weight of the packaged product.
2.79 kg
Package height:The distance from the top to the bottom of the packaging.
328 mm
Package depth:The distance from the front to the back of the packaging.
447 mm
Package width:The distance from one side of the packaging to the other.
158 mm
Fan dimensions (W x D x H):
140 x 140 x 27 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
2.02 kg
Pump height:
9.8 cm
Pump depth:
7.8 cm
Pump width:
5.3 cm
Tube diameter:
1.24 cm
Tube inner diameter:
6 mm
Tube length:
45 cm
VRM fan diameter:
4 cm
Radiator height:
13.8 cm
Radiator depth:
45.8 cm
Radiator width:
5.3 cm

Product details

ACFRE00110A Arctic

£0.00 and

SKU: ACFRE00110A