Design
On/off switch:The button which is pressed to switch the device on or off.
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
1 fan(s)
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
12 cm
General
Type:Characteristics of the device.
Power Supply Units
Logistics data
Harmonized System (HS) code:
84733020
Packaging content
Cables included:
CPU, PCIe, Peripheral (Molex), SATA
Packaging data
Package type:The type of product package e.g. box.
Box
Performance
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
100000 h
ATX version:ATX (Advanced Technology eXtended) is a motherboard form factor specification developed by Intel in 1995. The specification defines the key mechanical dimensions, mounting point, I/O panel, power and connector interfaces between a computer case, a motherboard and a power supply. There are many versions of ATX including ATX12V 1.x and ATX12V v2.3.
2.31
80 PLUS certification:
80 PLUS Gold
Purpose:What the product is used for.
PC
Ports & interfaces
Cabling type:
Fully-Modular
Floppy drive power connector:
1
ATX power connector (20+4 pin):
CPU power cable length:
60 cm
CPU power connector (4+4 pin):
PCI Express power cable length:
75 cm
PCI Express power connectors (6+2 pin):
6
EPS power connector (4+4 pin):
Peripheral (Molex) power cable length:
500,620,740 mm
Peripheral (Molex) power connectors (4-pin):White 4-pinned connector used to connect a peripheral to the power supply.
3
SATA power cable length:
1050,600,750,900 mm
Number of SATA power connectors:
8
Motherboard power cable length:
61 cm
Motherboard power connector:The way in which the motherboard is connected to the power supply.
20+4 pin ATX
Power
Power protection features:Features that protect the device against power problems e.g. overload.
Over current, Over power, Over voltage, Short circuit, Under voltage
Max output current (+5Vsb):
3 A
Max output current (-12V):
0.3 A
Max output current (+5V):
25 A
Max output current (+12V):
83.3 A
Max output current (+3.3V):
25 A
Combined power (+5Vsb):
15 W
Combined power (-12V):
3.6 W
Combined power (+5V):
125 W
Combined power (+12V):
999.6 W
Combined power (+3.3V):
125 W
Power Factor Correction (PFC) type:
Active
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Total power:The total power that is needed by the device, or the total power produced by the device.
1000 W
Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
86 mm
Depth:The distance from the front to the back of something.
150 mm
Width:The measurement or extent of something from side to side.
140 mm
