Quick Code: Q MPN: KL-600V2
£0.00

Out of Stock

Overview


The Classic Power PSUs from Kolink boast an improved circuit design and an associated performance increase. These features offer a significant enhancement of voltage regulation and meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design and the flexible and flat cables use for connections across the system.

Kolink Classic Power: Full performance and high efficiency
The 600 Watt model of the Classic Power series offered here has enough connections and performance for fast gaming computers with basic equipment. The PSU delivers up to 546W and 45.5A on the +12V rail while providing 100W and 15A each on the +3.3V and +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU and exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSU's highly efficient circuit design features independent DC-to-DC converters for the 3.3V and 5V outputs, ensuring extremely precise voltage regulation.

Each example of Classic-Power series is cooled by a 120 mm fan with durable and quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan and thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU and two 6+2 pin connectors for dedicated graphics cards. Four SATA and two Molex connectors are available for additional components. The flat, flexible and completely black cables have a modern look and fit into almost any up-to-date gaming setup.




At-a-glance


  • 546W and 45.5A on a 12V rail

  • 80 PLUS bronze certificate for high efficiency

  • ATX form factor with a length of 160 mm

  • Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex

  • Modern look with flat black cables




Reasons to buy

  • 546W and 45.5A on a 12V rail
  • 80 PLUS bronze certificate for high efficiency
  • ATX form factor with a length of 160 mm
  • Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex
  • Modern look with flat black cables

Specification

Technical Description:

Design
On/off switch:The button which is pressed to switch the device on or off.
Yes
Fan location:
Top
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
1 fan(s)
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
12 cm
Product colour:
Black

Performance
Bearing technology:
Sleeve
EPS version:
2.92
ATX version:ATX (Advanced Technology eXtended) is a motherboard form factor specification developed by Intel in 1995. The specification defines the key mechanical dimensions, mounting point, I/O panel, power and connector interfaces between a computer case, a motherboard and a power supply. There are many versions of ATX including ATX12V 1.x and ATX12V v2.3.
2.4
Supported motherboard form factors:Design of the supported motherboards.
ATX
80 PLUS certification:
80 PLUS Bronze
Purpose:What the product is used for.
PC

Ports & interfaces
ATX power connector (20+4 pin):
Yes
PCI Express power connectors (6+2 pin):
2
EPS power connector (4+4 pin):
Yes
Peripheral (Molex) power connectors (4-pin):White 4-pinned connector used to connect a peripheral to the power supply.
2
Number of SATA power connectors:
4
Motherboard power connector:The way in which the motherboard is connected to the power supply.
20+4 pin ATX

Power
Power protection features:Features that protect the device against power problems e.g. overload.
Over current, Over voltage, Overload, Short circuit, Under voltage
Efficiency:
85%
Max output current (+5Vsb):
2.5 A
Max output current (-12V):
0.3 A
Max output current (+5V):
15 A
Max output current (+12V):
45.5 A
Max output current (+3.3V):
15 A
Combined power (+5Vsb):
12.5 W
Combined power (-12V):
3 W
Combined power (+5V):
100 W
Combined power (+12V):
546 W
Combined power (+3.3V):
100 W
Power Factor Correction (PFC) type:
Active
Input current:
5 A
AC input frequency:
50 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
230 V
Total power:The total power that is needed by the device, or the total power produced by the device.
600 W

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
86 mm
Depth:The distance from the front to the back of something.
160 mm
Width:The measurement or extent of something from side to side.
150 mm

Product details

KL-600V2 Kolink

£0.00 and

SKU: KL-600V2