Audio
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
20 - 20000 Hz
RMS power output per channel (8 Ohm):
60 W
RMS power output per channel (4 Ohm):
60 W
Signal-to-Noise Ratio (SNR):This is the ratio of signal intensity to noise intensity.
80 dB
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
0.003%
Amplifier class:An electronic amplifier, amplifier, or (informally) amp is an electronic device that increases the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with a larger amplitude. Power amplifier circuits (output stages) are classified as A, B, A/B and C for analog designs, and class D and E for switching designs based on the proportion of each input cycle (conduction angle), during which an amplifying device is passing current.
D
Peak power per channel:The maximum power (usually measued in watts) that can be transmitted through a channel.
120 W
General
Type:Characteristics of the device.
Audio Amplifiers
Logistics data
Harmonized System (HS) code:
85184000
Ports & interfaces
Speakers connectivity type:The type of connection used for the speakers e.g. RCA connector.
3.5mm
Power
Power protection features:Features that protect the device against power problems e.g. overload.
Over current, Overheating
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
85 - 265 V
Technical details
On/off switch:The button which is pressed to switch the device on or off.
Connectivity technology:
Wired
Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
43.6 mm
Depth:The distance from the front to the back of something.
163 mm
Width:The measurement or extent of something from side to side.
214.6 mm
