Amplifier
Amplifier output power:
54 W
Amplifier:Electronic device for increasing the amplitude of electrical signals, used chiefly in sound reproduction.
Built-in
Audio
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
1%
Sensitivity:Responsiveness to audio slight changes.
101 dB
Impedance:The effective resistance of an electric circuit or component to alternating current, arising from the combined effects of ohmic resistance and reactance.
8 O
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
50 - 20000 Hz
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
30 W
Logistics data
Harmonized System (HS) code:
85182200
Loudspeakers
Woofer diameter (imperial):
13.3 cm (5.25")
Woofer:Loudspeaker designed to reproduce low frequencies.
Tweeter diameter (imperial):
1.27 cm (0.5")
Tweeter:Loudspeaker designed to reproduce high frequencies.
Speaker placement:The position of the speaker.
Wall-mountable
Speaker type:Loudspeaker number of ways.
2-way
Packaging content
Mounting brackets included:
Packaging data
Package weight:Weight of the packaged product.
5.5 kg
Package height:The distance from the top to the bottom of the packaging.
395 mm
Package depth:The distance from the front to the back of the packaging.
275 mm
Package width:The distance from one side of the packaging to the other.
235 mm
Performance
On/off switch:The button which is pressed to switch the device on or off.
Bass reflex:Type of loudspeaker enclosure that uses the sound from the rear side of the diaphragm to increase the efficiency of the system at low frequencies as compared to a typical closed box loudspeaker or an infinite baffle mounting.
Housing material:
Polypropylene (PP)
Recommended usage:What the product should be used for, and how it should be used (e.g. ambient temperature).
Universal
Ports & interfaces
Bluetooth:Bluetooth is a low-power radio technology developed to replace the cables and wires currently used to link or connect electronic devices such as personal computers, printers, and a wide variety of handheld devices including mobile phones. Because it uses radio-wave connectivity, a Bluetooth-enabled device has a constant, established connection to whatever browser it uses. This saves the user the trouble of logging on to check for emails or news updates, for example.
Connectivity technology:
Wired
Power
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100-240 V
Power source type:What the power source is.
AC
Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
245 mm
Depth:The distance from the front to the back of something.
164 mm
Width:The measurement or extent of something from side to side.
183 mm
