Features
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
2500000 h
Rotational Vibration (RV) sensors:
Uncorrectable Bit Error Rate (UBER):
< 1 per 10^15 bits read
Average latency:The average duration before a device can start with a job (for example reading a file from a hard disk).
4.16 ms
HDD sustained transfer rate:
258 MiB/s
HDD interface transfer rate:
6 Gbit/s
Storage drive buffer size:
256 MB
Component for:What this product is used as a part of (component for).
Disk array
Type:Characteristics of the device.
HDD
Interface:Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Serial ATA III
General
Type:Characteristics of the device.
Internal Hard Drives
Operational conditions
Non-operating shock:Environmental requirements for optimal protection from impact in non-operating mode
200 G
Operating shock:Environmental requirements for optimal protection from impact in operating mode
50 G
Non-operating vibration:Environmental requirements for vibration in non-operating mode
2.27 G
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
5 - 60 °C
Packaging data
Quantity per pack:The amount in each pack.
20 pc(s)
Power
Operating voltage:Defines the range of operating voltages available
5 / 12 V
Power consumption (idle):
5.3 W
Power consumption (read):
9.4 W
Power consumption (write):
6.4 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
670 g
Depth:The distance from the front to the back of something.
147 mm
Height:The measurement of the product from head to foot or from base to top.
26.1 mm
Width:The measurement or extent of something from side to side.
101.8 mm
