TP-Link 18-Port Gigabit Rackmount Switch with 16 PoE+

Quick Code: Q368033 MPN: TL-SG1218MP
£178.00

Add to basket
In Stock

Overview


Professional High Power 18-Port Gigabit Rackmount Switch with 16-Port PoE+
Plug and Play, Multi-Purpose PoE Switch with Powerful Performance

Dedicated 16-Port PoE+ Switch (250 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 250 W PoE power budget* for the 16× gigabit PoE+ ports makes it suitable for a wide range of applications, from surveillance to networking in offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and etc.

QoS for a Lag-Free Experience
Ensures smooth traffic for latency sensitive applications, such as voice and video, by designating the priority of traffic based on Quality of Service (QoS).

Intelligent Power Management to Prevent Power Overload
When your total power consumption exceeds 250 W, Intelligent Power Management automatically cuts lower priority ports’ power to ensure high-priority ports’ power supply. This protects the device from power overload operation. It also automatically detects the required PoE power for your device and protects your non-PoE equipment from being damaged.

Wide Operating Temperature with Good Heat Dissipation
Durable metal casing and professional heat dissipation design ensure the wide operating temperature (0–50?) with reliability.

Multiple Application Scenarios
The TL-SG1218MP is fully compatible with PoE devices, such as IP cameras, access points, and IP phones. It also works with non-PoE wired devices to provide gigabit connections, such as PCs, printers, and IPTV.




At-a-glance


  • 16× gigabit PoE+ RJ45 ports, 2× gigabit non-PoE RJ45 ports, and 2× combo gigabit SFP slots

  • 802.1p/DSCP QoS enable smooth latency-sensitive traffic

  • Durable metal casing and professional heat dissipation design ensure a wide operating temperature range (0–50 ?)

  • High PoE power budget with up to 30 W for each PoE port and 250 W for all PoE ports*

  • Plug and play, with no configuration and installation needed

  • Working with IEEE 802.3af/at compliant PDs




Reasons to buy

  • 16× gigabit PoE+ RJ45 ports, 2× gigabit non-PoE RJ45 ports, and 2× combo gigabit SFP slots
  • 802.1p/DSCP QoS enable smooth latency-sensitive traffic
  • Durable metal casing and professional heat dissipation design ensure a wide operating temperature range (0–50 ?)
  • High PoE power budget with up to 30 W for each PoE port and 250 W for all PoE ports*
  • Plug and play, with no configuration and installation needed
  • Working with IEEE 802.3af/at compliant PDs

Specification

Technical Description: TP-Link 18-Port Gigabit Rackmount Switch with 16 PoE+
Certificates
Certification:
CE, FCC, RoHS

Certification
Certification:
CE, FCC, RoHS

Data transmission
Packet buffer memory:
4.1 MB
Jumbo frames:
10000
Jumbo frames support:
Yes
Forwarding rate:
26.78 Mpps
Switching capacity:The data transfer capacity of the switch per second.
36 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
8000 entries

Design
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
2 fan(s)
LED indicators:
Yes
Housing material:
Metal
Product colour:
Black
Form factor:The shape or design of the product.
1U
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
Yes

General
Type:Characteristics of the device.
Network Switches

Logistics data
Harmonized System (HS) code:
85176990

Management features
Traffic classification:
Yes
Quality of Service (QoS) support:
Yes
Switch type:What switch device has, managed or unmanaged.
Unmanaged

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
Cable types supported:
Cat3, Cat4, Cat5, Cat5e, Cat6
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
Cable types supported:
Cat3, Cat4, Cat5, Cat5e, Cat6
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x

Operational conditions
Heat dissipation:The heat generated by the power supply.
977.44 BTU/h
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C

Packaging content
Quick start guide:Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.
Yes
Cables included:
AC

Packaging data
Package weight:Weight of the packaged product.
3.05 kg
Package height:The distance from the top to the bottom of the packaging.
80 mm
Package depth:The distance from the front to the back of the packaging.
528 mm
Package width:The distance from one side of the packaging to the other.
250 mm

Ports & interfaces
Combo SFP ports quantity:
2
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Gigabit Ethernet (copper) ports quantity:
18
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
18

Power
Power consumption (max):The maximum amount of power used by the device.
286.64 W
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Power supply included:There is a power supply with this product.
Yes
Power source:What is providing power for the product e.g. mains electricity.
AC

Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget:
250 W
Power over Ethernet (PoE) power per port:
30 W
Power over Ethernet plus (PoE+) ports quantity:
16
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
44 mm
Depth:The distance from the front to the back of something.
180 mm
Width:The measurement or extent of something from side to side.
440 mm

Product details

TL-SG1218MP TP-LINK

TP-Link 18-Port Gigabit Rackmount Switch with 16 PoE+

£178.00 and In stock

SKU: TL-SG1218MP