DrayTek VigorAP 903 White Power over Ethernet (PoE)

Quick Code: Q134907 MPN: VAP903-K
£157.00

Add to basket
In Stock

Overview


VigorAP 903
Mesh Wireless 802.11ac Range Extender & Access Point
VigorAP 903 is a high-performance Mesh Wireless solution, designed to expand the wireless coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It can also be used as a traditional access point either managed or stand alone so has the flexibility to be used how you need it.

The VigorAP 903 is a dual-band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling.

Initial setup of the VigorAP 903 is easy with the DrayTek Wireless app, whether it's creating a new Mesh network or being set up in AP and Range Extender modes, the Quick Start Wizard assists throughout.
Manage the VigorAP 903 centrally through the VigorACS central management platform, VigorConnect, Router AP Management, or simply on its own as a stand-alone access point. The VigorAP 903 has the flexibility to be used how you need it.




Specification

Technical Description: DrayTek VigorAP 903 White Power over Ethernet (PoE)
Antenna
Antenna connector type:The way in which the antenna is connected to the device e.g. coaxial.
SMA
Antennas quantity:
2
Antenna features:
Detachable antenna
Antenna type:Type of antenna, also known an aerial, e.g. external, internal.
External

Certificates
Certification:
ROHS, CE

Certification
Certification:
ROHS, CE

Design
WPS push button:
Yes
Reset button:
Yes
On/off switch:The button which is pressed to switch the device on or off.
Yes
Product colour:
White
Placement:Where the product can be placed e.g. floor, wall.
Table, Wall

Features
Airtime Fairness (ATF):
Yes
Band steering:
Yes
User-based bandwidth limiting:
Yes
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Yes
Wi-Fi roaming:
Yes
Wi-Fi Multimedia (WMM)/(WME):
Yes
MIMO type:
Multi User MIMO
MIMO:
Yes
Number of users:The number of people that use or can use this product.
64 user(s)
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate (5 GHz):
866 Mbit/s
Maximum data transfer rate (2.4 GHz):
400 Mbit/s
5 GHz:
Yes
2.4 GHz:
Yes

General
Type:Characteristics of the device.
Wireless Access Points

Logistics data
Harmonized System (HS) code:
85176990

Operational conditions
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 45 °C
Operating relative humidity (H-H):
10 - 90%

Packaging content
Quick start guide:Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.
Yes

Ports & interfaces
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
1

Power
Power consumption (max):The maximum amount of power used by the device.
12 W
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Protocols
DHCP client:
Yes
DHCP server:A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.
Yes

Security
Access Control List (ACL):
Yes
Service Set Identifier (SSID) features:
SSID broadcast on/off
Security algorithms:Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.
EAP-TLS, PEAP

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
370 g
Height:The measurement of the product from head to foot or from base to top.
167 mm
Depth:The distance from the front to the back of something.
45 mm
Width:The measurement or extent of something from side to side.
107 mm

Product details

VAP903-K Draytek

DrayTek VigorAP 903 White Power over Ethernet (PoE)

£157.00 and In stock

SKU: VAP903-K