Features
Native Command Queuing (NCQ):
Average latency:The average duration before a device can start with a job (for example reading a file from a hard disk).
5 ms
Interface:Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Serial ATA II
Logistics data
Harmonized System (HS) code:
84717050
Operational conditions
Non-operating shock:Environmental requirements for optimal protection from impact in non-operating mode
1000 G
Operating shock:Environmental requirements for optimal protection from impact in operating mode
400 G
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 60 °C
Other features
Data transfer rate:Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
3 Gbit/s
Internal:The product is built in.
Mounting:
Vertical/Horizontal
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Supported HDD interfaces:
Serial ATA, Serial ATA II, Serial ATA III
Packaging data
Power
Operating voltage:Defines the range of operating voltages available
5 V
Power consumption (idle):
0.6 W
Power consumption (read):
1.4 W
Power consumption (write):
1.4 W
Power consumption (off):
0.1 W
Power consumption (standby):The amount of electricity that is consumed when the product is on standby.
0.1 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
698 g
Depth:The distance from the front to the back of something.
100.2 mm
Height:The measurement of the product from head to foot or from base to top.
6.8 mm
Width:The measurement or extent of something from side to side.
68 mm
